Who has ever build a Kayfun, properly instantly knows what to do. The Kayfun 5 however offers you a variety of convenient methods to place and mount your built.
Here are a few suggestions:

Small/ medium sized coils

For regular sized coils (length ~5mm) the easiest way to place and mount them is:

  • unscrew the build screws until they reach over the building hooks.
  • place your leads on each side between build screw and building hook.
  • screw down the build screws do fixate the wire.
  • clip your leads so that they don’t stick out over the rebuilding platform.
  • slightly lift up your coil to make sure it isn’t touching any steel part.

Medium sized/ large coils

For larger coils, you can also:

  • unscrew the build screws until they have the same height as the rebuilding hooks
  • wrap your leads around the rebuilding hooks on each side
  • screw down the build screws do fixate the wire.
  • clip your leads so that they don’t stick out over the rebuilding platform.
  • slightly lift up your coil to make sure it isn’t touching any steel part.

Oversized coils

  • unscrew the build screws until they have the same height as the rebuilding hooks
  • wrap your leads around the rebuilding hooks on each side
  • screw down the build screws do fixate the wire.
  • clip your leads so that they don’t stick out over the rebuilding platform.
  • slightly lift up your coil to make sure it isn’t touching any steel part.

Please notice that the Kayfun 5 has two pairs of build screws included in the spare kit.

The longer set is for builds with very thick wires only. These screws cannot be screwed into the base completely! Forcing them beyond the threading may cause them to break off and eventually leaving the base of the Kayfun 5 unusable. 

Please be aware that the rebuilding space is not endless. In case your build exceeds a diameter of 5mm and/ or a width of 9mm it may touch the evaporation chamber, when the liquid control is closed, which causes a short circuit

Example:

  • distance of the coil from the air outlet: 2mm
  • inner diameter: 3mm
  • wire size: 1mm
  • total size of the coil: 5mm 

K5-GT-3