Getting started – Kayfun Lite

Congratulations!

You’re the proud owner of a brand new Kayfun [lite]! To get started, here is an easy step by step guide:

  • Step 1

    Cleaning

    Out of the box all SvoëMesto products come thoroughly cleaned. We do however recommend to give the product a rinse after unboxing, to get rid of any dust particles that may have built up during the shipping process.

    Afterwards, make sure to dry the product thoroughly.

  • Step 2

    Lubrication

    Before using a SvoëMesto atomizer, it is recommended to lubricate the o-rings with a bit of e-liquid. That will reduce friction and assure a smooth operation.

    ATTENTION: Do not lube o-rings other than the ones shown in the picture above. 

    Step 2

  • Step 3

    Installing your build

    You can find a detailed instruction on how to rebuild your Kayfun in our Manual A5 EN or follow one of the reviews in the following playlist.

  • Optional

    Installing tank accessories

    If you chose to purchase a one of the tank accessories with your Kayfun [lite], here’s how to install them.

    First, disassemble the tank by unscrewing the topcap.

    • Bell:
      Put aside the topcap and tank window. Make sure the small o-ring on the chimney remains there. Screw the Bell on the chimney.
    • Dome
      Put aside the topcap and tank window. Make sure the small o-ring on the chimney remains there. Screw on the tank extension including the small o-ring. Screw the Dome on the extended chimney.

    • Longmode
      Put aside the tank window. Make sure the small o-ring on the chimney remains there. Screw on the tank extension including the small o-ring. Place your new window at the place of the original one Screw the topcap back on your extended chimney.

    Optional

  • Step 4

    Filling the tank

    Fill it in 3 easy steps.

    1. Unscrew the base from the base from the tank (if you haven’t already).
    2. Fill the tank from the bottom through the liquid channels with your favorite e-liquid.
    3. Screw the base back into the tank. Finger tight is enough. Don’t over-tighten it, so that it unscrews easily when you fill it the next time. 

  • Step 5

    Adjust your airflow.

    Set it and forget it.

    1. Insert a small flathead screwdriver into the 510 connector in the bottom. While fully assembled, put the Kayfun Lite with the mouthpiece to your lips and draw on it.
    2. Turn the screw inside the 510 connector clockwise to tighten the airflow or counter-clockwise to loosen it.

    Step 5

And just like that you’re all done and ready to go! Enjoy your brand new Kayfun [lite].

If you still have questions, you can find more useful information on the Kayfun [lite] product page.